davidbuckley.net
home  >  Jet-Laser < Bamduino > Baldur 13 July 2021

Bamduino by David Buckley January 2014

  • Bamduino - commands
  • Bamduino - programs
  • Bamduino program Rationales

  • Bambino - the original PicAxe version

  • All the Bambino pages and files BambinoRobot.zip

    Bamduino uses commands over a serial link, via an FTDI USB/Serial converter, from a Serial-Monitor rather than from an IR-controller, this allows many more commands to be used and importantly it allows the commands to be human readable ASCII which is a real advantage.
    Bambino Arduino was first shown to the public in May 2014 at the Bay Area Maker Faire by Michael Margolis where it was filmed by Lem Fugitt for his Robots-Dreams site, sadly Lem died and his site has gone.

    A friend started calling the Arduino version of Bambino, Bamduino, hence Bamduino!


    It can walk forwards and backwards and turn right or left;
    it walks by lifting its feet off the floor and doesn't use overlapping feet as toy robots do;
    it is driven by two servos;
    it is powered by 4 AAA cells in two holders on the sides of the body;
    the high level program has built in routines to :
    - listen out for commands through the programming/serial port (see below)
    - avoid obstacles
    - avoid drop-offs, ie table edges;
    - walk to a light;
    - walk away from a light;
    it has :
    - two forward facing optical obstacle sensors;
    - two downward facing optical obstacle sensors to sense drop-offs, ie table edges;
    - a piezo sounder for buzzes and tunes;
    - an indicator LED;
    - two high power LEDs which can be PWM controlled and used for HMI (Human Machine Interface)
    - two other high power LEDs which can be used for HMI;
    - an Ultrasonic ranging module;
    - a connector for a compass module;
    - A serial programming connector which can also be used to talk to an add-on higher level processor;
    it can;
    - learn and remember up to 16 sequences of commands;
    -- each sequence can chain to another sequence or itself so loops can be created;
    - have eight sets of behaviour variables which can be changed on the fly;
    - be given a name and associated with a group;
    - - so commands can be sent to an individual robot or to a particular group;
    it has : - a complete suit of fifty programs taking users from flashing an LED to making the robot walk while avoiding obstacle etc. It has code space left for enhancements.

    Upgrades>
    2 June 2021; I decided to revisit the IR problem and despite the complicated descriptions of the Sony IR protocol one can find on the web, it really is very simple. I wrote my own routine to decode the signals from a Sony handset as sold in the PicAxe Store, it took seven short lines of code!
    Bamduino now at BA50_IR can be controlled from a Sony-handset as well as over a Serial link.
    There is now a page here with Arduino routines for IRin, Serout, and Serin as in PicAxe Basic.