|home > ||Bambino < TecArm6v2 > Bambino-A||6 June 2021|
|TecArm6v2 by David Buckley||2012|
I siffened the limbs and added sliding feet for the waist movement to ease the strain on the servo-horn a made the gripper gear driven to balance the finger movement. The shop never materialised so the TecArm6v2 was put back on the shelf.
In 2020 during Covid lock-down I was talking to a friend who had purchased a hobby robot-arm from China and decided to look at my TecArm6v2 again. The original GUI written by Milford no longer worked in Windows-10 so I added an Aduino nano to accept high level commands from a serial-terminal and send the necessary codes to the existing servo controller on the arm. (I did the same for the TecArm5 prototype.)
Dimensions Upper Arm - Shoulder to elbow = 90 mm Fore Arm - elbow to wrist = 125 mm Hand - Wrist to fingertips = 100 mm Gripper - opening = 85 mm At 125mm extension - lift = ~450 g At maximum extension ~315mm - lift = ~200 g Servos Waist HiTEC HS-755HB 4.8/6v 0.28sec,0.23sec 8.8kg.cm(122.2oz.in), 10.5kg.cm(145.81oz.in) Shoulder HiTEC HS-805BB 4.8/6v 0.19sec,0.14sec 19.8kg.cm(275.09oz.in),24.7kg.cm(343.36oz.in) Elbow HiTEC HS-755HB 4.8/6v 0.28sec,0.23sec 8.8kg.cm(122.2oz.in), 10.5kg.cm(145.81oz.in) Wrist pitch JP SuperTec S06/2BB 7.2Kg.cm @4.8v, 8Kg.cm @6v Wrist turn JP SuperTec S03 3.4Kg.cm @4.8v, 4Kg,cm @6v Gripper JP SuperTec S03 3.4Kg.cm @4.8v, 4Kg,cm @6v